{"product_id":"aluminium-transmission-bash-plate-next-gen-ranger-everest-raptor-amarok-2333-1886-2-6","title":"Aluminium Transmission Bash Plate - Next Gen Ranger \/ Everest \/ Raptor \/ Amarok","description":"\u003ch2\u003eAluminium Transmission Bash Plate - Next Gen Ranger \/ Everest \/ Raptor \/ Amarok\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eComponent Protected:\u003c\/strong\u003e Transmission\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.rival4x4europe.com\/upload\/iblock\/2fc\/n5e36s1i6nzzzpu00hlyvncptin3k3fw\/2333.1886.2.6_21_lg.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRIVAL installation manual for this plate or set\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis 6mm aluminium transmission plate adds underbody protection for the applications listed below. The RIVAL installation manual specifies the mounting sequence, hardware and separate Ranger Raptor procedure. Protection is additional: it does not guarantee that the gearbox or vehicle will avoid damage in a collision.\u003c\/p\u003e\n\n\u003ch3\u003e✓ At a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✓ High-Strength Aluminium Construction\u003c\/li\u003e\n\u003cli\u003e✓ Laser-Cut \u0026amp; Deep-Stamped Construction\u003c\/li\u003e\n\u003cli\u003e✓ Additional Transmission Protection\u003c\/li\u003e\n\u003cli\u003e✓ Corrosion-Resistant Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e✓ Ventilated Plate Design\u003c\/li\u003e\n\u003cli\u003e✓ Install Using the Exact RIVAL Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6mm high-strength aluminium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder-coated finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bolt-on using factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Check the exact model, engine and transmission against the Compatibility section and linked manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight and Vehicle Loading\u003c\/h3\u003e\u003cp\u003eInstalled mass for this exact plate has not been independently established. Do not use catalogue or shipping weight as proof of installed mass. Check the completed vehicle against its permitted loads; no fuel-economy, payload or GVM improvement is promised.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✓ 1x RIVAL 4x4 Transmission Bash Plate\u003c\/li\u003e\n\u003cli\u003e✓ Complete Mounting Hardware \u0026amp; Bolt Kit\u003c\/li\u003e\n\u003cli\u003e✓ Installation Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eUse a basic tool kit and torque wrench, following the complete RIVAL manual. It specifies approximately one hour for installation and M10 tightening torque of 47 Nm. Ranger Raptor uses the separate bracket procedure. Check the assembly and fasteners after installation and at the manual's stated 400 km intervals; damaged parts need inspection before further use.\u003c\/p\u003e\n\n\u003ch3\u003eCare and Inspection\u003c\/h3\u003e\u003cp\u003eInspect the plates, brackets and fasteners after fitting and after an impact. Follow the RIVAL instructions and seek qualified inspection if any part is damaged.\u003c\/p\u003e\n\n\u003ch3\u003eUse and Maintenance\u003c\/h3\u003e\u003cp\u003eUse only on a confirmed vehicle application and within the vehicle manufacturer's operating limits. Inspect the plate, brackets and fasteners regularly and after an impact. Do not ignore damage or loose fittings.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Ranger Double Cab: 3.0D or 2.0D Bi-Turbo, automatic, 4WD (2022 onwards).\u003c\/li\u003e\n\u003cli\u003eFord Ranger Raptor: 3.0, automatic, 4WD (2022 onwards).\u003c\/li\u003e\n\u003cli\u003eFord Everest: 2.0D Bi-Turbo, automatic, 4WD (2022 onwards).\u003c\/li\u003e\n\u003cli\u003eVolkswagen Amarok: 2.0D or 3.0D, automatic, 4WD (2023 onwards).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese are the applications in RIVAL manual version 1 dated 21 August 2023. Confirm your exact build and any modifications before ordering; other engine or transmission combinations are not established by this manual.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eConfirm your exact vehicle and read the installation manual before ordering. Contact RIVAL if you need a fitment check.\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Rival","offers":[{"title":"Default Title","offer_id":58634095493423,"sku":"2333.1886.2.6","price":289.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/1927\/5311\/files\/Ford-Ranger-Next-Gen-Ford-Everest-Next-Gen-Ford-Raptor-Next-Gen-Amarok-_2023-Present_-4x4-Transmission-Bash-Plate-_-Aluminium-RIVAL-300167911.jpg?v=1791800447","url":"https:\/\/www.the4x4store.com.au\/products\/aluminium-transmission-bash-plate-next-gen-ranger-everest-raptor-amarok-2333-1886-2-6","provider":"The 4x4 Store","version":"1.0","type":"link"}